Our COVID-19 Response
Doors are available in a range of COLORBOND® colours
Taurean Door System's Roller and Sectional Door door products are protected in Australia by registered designs.
Our safety recommendations are as follows:
Please contact Taurean Door Systems for more advice, or to obtain contact details of Taurean's Door Dealer in your area who can service your door.
Stramit has in-house, purpose built testing equipment used to design, develop and improve products for the Australian market.
Many of our products, including Taurean Door Systems' roller doors, are tested or witnessed by independent organisations. These include University of Technology, Sydney; the Cyclone Testing Station (James Cook University); The University of Sydney; and CSIRO.
The ongoing research and development activity ensure we remain at the forefront of innovation, design and consumer information.
Without appropriate measures in place, roller doors can be easily damaged in transport. The following handling advice will help ensure your Taurean roller door is delivered safely and damage-free.
The 12 month product warranty covers domestic installations only and is for steel cracking, lock seam failure of the door curtain and all other door items.
Excluded from the warranty is salt corrosion or any damage to the door curtain from any environmental conditions or issues.
Heavy-duty extruded aluminium or box section steel bottom rails are available in three profiles to suit different applications.
An electric motor drive can be fitted to any roller shutter. Drives feature travel limit switches, wall-mounted reversing contactor box with thermal overload switch, oil-filled heavy duty worm drive gearbox with emergency hand chain operation in case of power failure.
Motors are three-phase or single phase to suit power supply. Optional remote controls, card readers and key switches are also available.
Mounded nylon end clips ensure smooth, low friction operation, and can be readily replaced if damaged or worn. Standard nylon end-clips are fitted to every second slat in all shutters, except wind-locked and fire resistant models.
Special bottom rails can be fabricated to suit slopes, steps or any non-standard opening.
The TauraEdge® Roller Door Track is the first of its type in Australia, with a rolled over design replacing the standard edge. The sides are completed encased - simple but effective.
Stronger and more rigid than standard roller door tracks, the TauraEdge® Roller Door Track is all about safety, design improvements and efficiency.
Find out more about the TauraEdge® Roller Door Track.
Shutters can be pre-punched or perforated to provide ventilation for applications such as shops and car parks. Slotted slats provide 11% maximum ventilation, while perforated slats achieve 40% ventilation.
Special heavy-duty rubber seal available to seal the bottom rail against rain, leaves and dust.
Gates can be fitted to all shutters except those with wind-lock guides. They mount to the guide track on the left or right side of the opening.
Wicket gates open to the inside and include a key-operated night latch which locks automatically when closed. Gates are 1130mm high by 600mm wide and fit to the shutter curtain approximately 300mm above the bottom rail.
Escape doors, which open outwards, are 2000mm high by 1000mm wide and are mounted at floor level.
Please refer to the Taurean Windstrong Windlocked Roller Doors Product Brochure for information regarding wind loads.
The following handy hits and tips will help ensure your garage door has a long life.
Service and repair
Please contact Taurean customer service team for more advice.